 |
What are some good work practices to follow?
What are some general precautions to know when using Personal Protective Equipment (PPE)?
What are some good work practices to follow? - Read, understand, and follow the instructions and recommendations described in the operating and maintenance manuals for tools and equipment you use.
- Stop the engine and disengage power before servicing.
- Work as a team. Do not start an engine, engage power, raise, or lower an implement or hoist without warning other people in the area.
- Lock out equipment by removing the ignition key and by disconnecting the battery cables.
- Attach a "Do Not Operate" tag to the vehicle's control panel with the reason stated (such as 'no brakes').
- Use jacks and hoists to move and handle heavy components.
- Use solvents with a flashpoint above 60º C where possible to reduce the risk of fire.
- Clean up spilled oil, grease, fuel and other slipping and fire hazards immediately.
- Inspect compressed air hoses regularly, and immediately replace any which are cracked, worn or frayed.
- Ensure that air pressure reducers, gauges and moisture/dirt traps are cleaned and functioning.
- Dispose or recycle waste materials in accordance to government regulations.
- Above and underground tanks, pump pits, and similar areas are considered confined spaces and can be dangerous. Only specifically trained individuals are allowed entry. Contact your local jurisdiction for more information.
- Do not use gasoline for cleaning. Use cleaning solvents in approved containers.
- Do not wear rings, watches, ties, jewelry, or torn or loose clothing. Button up shirt front and sleeves.
- Do not run engines inside unless ventilation systems are attached, and the exhaust is vented outside.
- Change oily clothing and launder regularly to prevent skin irritation and dermatitis.
What are some general precautions to know when using Personal Protective Equipment (PPE)? - Wear approved safety glasses, goggles, face shield and/or headwear as necessary when doing work such as grinding, hammering, cutting, welding, and working with batteries. Refer to the OSH Answers section Personal Protective Equipment for more information.
- Wear approved respiratory protection when sanding, grinding, and spray painting.
- Wear approved footwear with oil-resistant soles.
- Use approved protective headwear when working in pits, under hoisting equipment, or where there is the danger of materials falling from above.
- Protect yourself from sharp edges and protruding parts. Wear gloves and cover sharp objects with tape, rags or wooden guards.
 |
Document last updated on September 8, 1999
Copyright ©1997-2008 Canadian Centre for Occupational Health & Safety
|
OSH Answers Lists
