Canadian Flag Canadian Centre for Occupational Health and Safety Centre canadien d'hygiène et de sécurité au travail Government of Canada Wordmark
CCOHS: Canadian Centre for Occupational Health and Safety
Français Contact Us Help
        
Canada Site
Web Info Service Products & Services OSH Answers Education & Training
Canada's national Occupational Health & Safety Resource
Home About Us E-News Bringing Health to Work Events Resources
OSH Answers Lists
What's New!
Subject Categories
Landscaping
Equipment
Garden Tractors
General
Grass Trimmers and Brush Cutters
Infectious Waste
Loaders
Manual Materials Handling
Pesticides - Personal Protective Equipment
Pesticides - Precautions
Riding Lawn Mowers
Rotary Power Lawn Mowers
Shovelling and Digging
Snow Blower
Tree Trimming
Vehicle Start-up - the Circle Check
Waste Management
Related Products and Services

Publications:
Cold Weather Workers Safety Guide
Groundskeepers Safety Guide
More Information
About OSH Answers
Feedback
Disclaimer
Inquiries Service

The Inquiries Service at CCOHS answers questions on the health or safety concerns people have about the work they do.

About the Inquiries Service
Ask a Question

Riding Lawn Mowers



What are some safety tips when using riding lawn mowers?

Training

  • Read, understand, and follow the instructions in the manufacturer's operating manual.
  • Ensure your supervisor has fully trained you on how to operate the mower. Your supervisor should demonstrate how to use the mower, and observe you working with it until satisfied that you can operate it safely.
  • Be aware of the mower's safety features, including how to stop the mower quickly in case of an emergency.
  • Test ride the machine and become familiar with it before engaging the mower blade.

Personal Protective Equipment

  • Wear hearing and head protection and safety glasses.
  • Wear close-fitting clothes, and sturdy, non-slip safety toe footwear (no barefeet, sandals or sneakers!)
  • Portable music players are not recommended since they are a distraction.
  • Check that the tractor is equipped with a rollover protective structure (ROPS) and a seat belt. If not, have it retrofitted for one. In Ontario, tractors over 20 horsepower require a ROPS.

Preparing the area

  • Clear the work area of debris, sticks, stones, toys, etc. that might be thrown by the blades. Lawn mowers blades can throw out hit material at about 91 metres per second (300 feet per second) or 330 kilometres per hour (200 miles per hour).
  • Ensure grass is dry.

Preparing the mower

  • Maintain mower and attachments in good operating condition. An annual inspection by an experienced technician is a good idea.
  • Keep safety devices and guards in place. The operator-presence switch should stop the mower immediately when you release the control.
  • Inspect the mower prior to starting. Make certain that the blade is sharp and secure.
  • Check that the power take off, mower input driveline, drive belts, chains, and gears are all properly guarded. Repair or replace if necessary.
  • Set mower at the highest cutting point when operating on rough ground before starting the mower.
  • Run the engine at the lowest speed that will do the job (reduces force of thrown objects).
  • Check the blade-mounting bolts frequently for tightness.
  • Check grass catcher bags for wear. Replace worn bags.
  • Add gasoline when the mower is turned off and the engine is cool. Do not smoke when refueling!
  • Restart engine at least 8 metres (25 feet) from where you refueled to avoid igniting vapours.
  • Store gasoline safely - outside and away from any heat source.

Mowing tips

  • Disengage all attachment clutches and shift mower into neutral before attempting to start the engine.
  • Only start the mower when seated in the driver's seat.
  • Look behind mower when backing up for children, pets or obstructions. Back up only minimal distances.
  • Mow straight up and down slopes rather than sideways for greater stability (unless mower is counter-balanced).
  • Reduce speed on slopes and when making sharp turns to prevent tipping or loss of control.
  • Watch for rocks, holes and other hazards, including tree limbs or shrubs at eye level.
  • Mow very tall grass twice at 90-degree angles if possible.
  • Mow only in daylight.
  • Stop and inspect the blades and shaft if the mower runs into a rock or stump. Damaged blades can cause vibration and vibration can loosen the blades.
  • Keep the discharge chute pointed away from buildings, people, and animals.
  • Keep hands and feet away from all moving parts.
What should I be aware of when pulling loads?

Pull loads as follows:

  • Use approved hitch points.
  • Limit load weight and size to what is recommended by the manufacturer.
  • Do not turn sharply.
  • Use counterweights as recommended by manufacturer.
Before making any repairs or adjustments, what should I do?

Disengage power to attachments and stop the motor before leaving operator's position or making any repairs or adjustments by:

  • setting the brakes;
  • putting the transmission in park, if possible;
  • turning off the ignition and removing the ignition key;
  • disconnect the spark plug to insure that the engine cannot start for any reason.

If it is unavoidable that you have to stop on a slope, chock in the front and back of a "drive" wheel to prevent the mower moving unexpectedly.

What should I avoid doing when using a riding lawn mower?

  • Do not use mower on a very steep slope. The mower may tip or roll over, causing serious injury.
  • Do not drive too close to a creek or ditch.
  • Do not remove grass catcher or unclog chute with the motor running.
  • Do not leave mower on a slope.
  • Do not carry passengers.
  • Do not stop or start suddenly when going uphill or downhill.
  • Do not run the engine indoors.
  • Do not mount or dismount while the mower is running. There is sufficient space for your toes to pass under the mower housing and be struck by the blade.
  • Do not leave a lawn mower unattended if the engine is running (even if the blade is not turning).
  • Do not touch hot motor parts.

Document last updated on June 6, 2007

Copyright ©1997-2008 Canadian Centre for Occupational Health & Safety


Important Notices and Disclaimers
©CCOHS, 2008
Technical Support
 
Client Services
Products & services info
Inquiries Service
Answers to workplace questions
Webmaster
Website feedback